Flowserve SLD - Manual (Page 8)

TO REORDER REFER TO
B/M #
F.O .
FIS119eng REV 03/13 Printed in USA
flowserve.com
To find your local Flowserve representative
and find out more about Flowserve Corporation,
visit www.flowserve.com
Flowserve Corporation has established industry leadership in the design and manufacture of its products. When properly selected, this
Flowserve product is designed to perform its intended function safely during its useful life. However, the purchaser or user of Flowserve
products should be aware that Flowserve products might be used in numerous applications under a wide variety of industrial service
conditions. Although Flowserve can provide general guidelines, it cannot provide specific data and warnings for all possible applications. The
purchaser/user must therefore assume the ultimate responsibility for the proper sizing and selection, installation, operation, and maintenance
of Flowserve products. The purchaser/user should read and understand the Installation Instructions included with the product, and train its
employees and contractors in the safe use of Flowserve products in connection with the specific application.
While the information and specifications contained in this literature are believed to be accurate, they are supplied for informative purposes
only and should not be considered certified or as a guarantee of satisfactory results by reliance thereon. Nothing contained herein is to
be construed as a warranty or guarantee, express or implied, regarding any matter with respect to this product. Because Flowserve is
continually improving and upgrading its product design, the specifications, dimensions and information contained herein are subject to
change without notice. Should any question arise concerning these provisions, the purchaser/user should contact Flowserve Corporation
at any one of its worldwide operations or offices.
© 2013 Flowserve Corporation
USA and Canada
Kalamazoo, Michigan USA
Telephone: 1 269 381 2650
Telefax: 1 269 382 8726
Europe, Middle East, Africa
Roosendaal, the Netherlands
Telephone: 31 165 581400
Telefax: 31 165 554590
Asia Pacific
Singapore
Telephone: 65 6544 6800
Telefax: 65 6214 0541
Latin America
Mexico City
Telephone: 52 55 5567 7170
Telefax: 52 55 5567 4224
5 Specifications
The Flowserve SLD Seal Support System is designed to work best in temperature
environments between minus -20°C (4°F) and plus 55°C (130°F).
Mini Luber dimensions: 117.5 mm high X 79.5 mm diameter
(4.625 inch X 3.125 inch)
nipple 1/4 inch NPT
Mini Luber grease capacity: 125 cc (approximately 4 oz.)
Jumbo Luber dimensions: 168.5 mm high X 120.5 mm diameter
(6.625 inch) X (4.750 inch)
nipple 1/2 inch NPT
Jumbo Luber grease capacity: 475 cc (approximately 16 oz.)
For special problems encountered during installation or for further information
regarding applications outside of specifications, contact your nearest Flowserve
Sales and Service Representative or Authorized Distributor.