Flowserve ME User Manual
Page 15
ME USER INSTRUCTIONS ENGLISH 71576287 - 02/13
Page 15 of 36
flowserve.com
3.3 Coverage charts
4 INSTALLATION
Equipment operated in hazardous locations
must comply with the relevant explosion protection
regulations. See section 1.6.4, Products used in
potentially explosive atmospheres.
All equipment must be grounded.
4.1 Location
The pump should be located to allow room for
access, ventilation, maintenance and inspection with
ample headroom for lifting and should be as close as
practicable to the supply of liquid to be pumped.
See also other documents in the category Flowserve Pumps:
- CESM-4 (28 pages)
- CESM-1 (32 pages)
- ATEX N (20 pages)
- CESM-2 (32 pages)
- PVML (29 pages)
- WDX (46 pages)
- WMA2 (35 pages)
- WX Worthington (51 pages)
- WX Worthington (52 pages)
- Type RX (56 pages)
- LCH (40 pages)
- NM (48 pages)
- MJ Slurry (42 pages)
- Mark 3 (48 pages)
- MN (49 pages)
- MF (50 pages)
- CPXVC (32 pages)
- M Slurry (60 pages)
- PolyChem GRP (52 pages)
- CPXV fitted with FRBH hydraulics (44 pages)
- Durco Mark 3 ISO Frame Mounted (52 pages)
- MP1 Sier-Bath (48 pages)
- Twin Screw Rotary (56 pages)
- LNNC (56 pages)
- IDP CPXRV (48 pages)
- HWX Worthington (40 pages)
- U-MAG INNOMAG (40 pages)
- N-Series Worthington (20 pages)
- TB-MAG INNOMAG (44 pages)
- HDX IDP (64 pages)
- QLQC Vertical Worthington (61 pages)
- LPNV Worthington (48 pages)
- Mark 3 ISO Durco (32 pages)
- MEN-TI (36 pages)
- MEN (36 pages)
- FP (40 pages)
- FP (40 pages)
- FM (36 pages)
- MENBLOC 60Hz (36 pages)
- PVXM (31 pages)
- VTP (76 pages)
- PLEUGER (40 pages)
- APKD (55 pages)
- WJE IDP (28 pages)