Directed Electronics 571XV - Manual (Page 19)

16 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d
panic mode
If you are threatened in or near your vehicle, you can attract
attention by triggering the system with your 2-way remote. Just
press for 3-seconds, and you will enter Panic Mode. The
horn will honk (if connected) and the parking lights (if
connected) will flash for the programmed duration. To stop Panic
Mode at any time, press or on the 2-way remote.
The remote responds with one flash of the Red LED upon
entering Panic Mode and two flashes of the Red LED upon
exiting Panic Mode.
valet mode
You can prevent your system from automatically activating the
Failsafe ® Starter Kill and locking the doors by using Valet Mode.
This is very useful when washing the vehicle or having it serviced.
In Valet Mode, the starter kill cannot be activated, even with the
2-way remote, but all convenience functions (door locks, remote
start, etc.) will continue to work normally.
To enter or exit Valet Mode:
1. Turn the ignition On.
2. Turn the ignition Off.
3. Press and release the Valet
button once within 10 seconds.
DRW-35
➜
n noottee:: In order for Panic Mode to be effective, the vehicle’s
horn (or optional siren) as well as the vehicle’s parking
lights must be connected.
➜