Fire Magic 3050 Infrared Burnet Kit - Manual (Page 3)

REV 6 - 1502230915 L-C2-251 3
INSTALLING THE NEW INFRARED BURNER
1. Use the 3 / 8 inch hex nut driver to remove the exposed gas orifi ce
and replace it with the correct orifi ce for the new infrared burner
included with your kit (See Table see 1-1. See also Fig. 3-1, 3-2
and 3-3).
Note: You may need to lean over the oven and look back toward the
inside front of the grill to see the orifi ce.
Burner
Control
Knob
Front
Burner
Gas Conduit
Manifold
Orifi ce
Burner
Fig. 3-3 Orifi ce location cut away side view
Echelon Diamond Shown
Fig. 3-2 Replace the gas orifi ce
Fig. 3-1 Locate the gas orifi ce
Exposed gas orifi ce
Gas orifi ce
Exposed ignitor
electrode
INSTALLATION (cont.)