Fire Magic 3593 New Ice Maker - Manual (Page 11)

REV 1 - 1401311400 L-C2-393 11
LEVELING THE ICE MAKER
It is important for the ice maker to be leveled in order to
work properly; otherwise water will not fl ow as it should
through the evaporator (ice mold). Ice production will be
less than normal, and operation will be noisy. The ice
maker can be raised or lowered by four leveling legs on
the bottom of the machine. If you fi nd that the surface is
not level. You may need to make several adjustments to
level the machine. We recommend using a carpenter’s
level to check it.
1. Place a carpenter’s level on top of the product to see
if the ice maker is level from front to back and side
to side.
2. Adjust the height of the legs as follows:
• Turn the leveling legs to the right to lower that side of the ice maker.
• Turn the leveling legs to the left to raise that side of the ice maker.
Important: Once you are ready to install it in a cabinet or directly on the fl oor, you must adjust the
legs to level the ice maker.
REVERSING THE DOOR SWING
Tools needed: Flat screwdriver, Phillips screwdriver
Important: Before you begin, unplug the ice maker or disconnect power.
Down Up
Top hinge cover
Door
Top hinge mat
Top hinge
Cabinet
Bottom hinge
Top hinge
Bottom
hinge
INSTALLATION