beautypg.com

Installation (cont.) – Fire Magic Electric Grill User Manual

Page 7

background image

7

INSTALLATION (cont.)

CONNECTING TO ELECTRICAL OUTLET

This electrical appliance is equipped with a three-
pronged (grounding) plug for your protection
against shock hazard and should be plugged
directly into a properly grounded three-prong GFI
protected receptacle. Do not cut or remove the
grounding prong from the plug. (See Fig. 7-2.)

Do not operate any appliance with a damaged
cord or plug, or after an appliance malfunction.
Return the appliance to your dealer or authorized
service facility for inspection, repair or electrical/
mechanical adjustment.

Fig. 7-2

GFI

receptacle

Test and

reset

switches

Grounding

plug

INNER LINERS

The inner liners come installed in the unit. To remove
for cleaning:

1. Remove the warming rack and cooking grids.

Grasp the cool cooking element and apply
pressure towards the right of the grill. Once it
clears the tab, completely raise it up. Lift the
two side liners up and out (Fig. 7-1).

2. Lift the rear liner slightly up to clear the tab,

then forward and out (Fig. 7-1).

3. Move the front liner slightly toward the back of

the grill, then lift up and out (Fig. 7-1).

Re-installing the liners is the reverse of above. (The
order for re-install is front liner, rear liner, then side
liners.)

Fig. 7-1

EXTENSION CORDS

Use only a 14-gauge extension cord, with a
3-prong plug, suitable for use with outdoor
appliances. The maximum length allowed for the
extension cord is 25 feet. Do not use damaged
extension cords. Examine extension cord before
using and replace if damaged. Keep cord away
from heat and sharp edges.

Important: Connection to an extension cord

shall be kept dry and off the ground.

OPTIONAL ROTISSERIE

If the optional rotisserie has been selected; the
rotisserie bracket must be installed prior to use.

1. Using a Phillips screwdriver; remove the 2

screws located towards the rear, right side
of the grill.

2. Align the holes of the rotisserie bracket with

the exposed screw holes on the grill. Using
the screws from step 1, fasten the bracket to
the grill (see Fig. 7-3).

Reference the ROTISSERIE section for
instructions on how to use the rotisserie.

Fig. 7-3

REV 4 - 1108111117

L-C2-303