Dukane Projector 8920H-RJ - Manual (Page 45)

45
OPTION menu
Item Description
MY BUTTON
This item is to assign one of the following functions to MY BUTTON
1/2 on the remote control (6).
(1) Use the ▲/▼ buttons on the MY BUTTON menu to select a
MY BUTTON - (1/2) and press the ► button to display the MY
BUTTON setup dialog.
(2) Then using the ▲/▼/◄/► buttons sets one of the following
functions to the chosen button. Press the ENTER or INPUT
button to save the setting.
• COMPUTER IN1: Sets port to COMPUTER IN1.
• COMPUTER IN2: Sets port to COMPUTER IN2.
• COMPONENT: Sets port to COMPONENT (Y, Cb/Pb, Cr/Pr).
• S-VIDEO: Sets port to S-VIDEO.
• VIDEO: Sets port to VIDEO.
• INFORMATION: Displays SYSTEM_INFORMATION,
INPUT_INFORMATION (50), NETWORK_INFORMATION
(55) or nothing.
• AUTO KEYSTONE : Performs automatic keystone distortion
correction (35).
• MY MEMORY: Loads one of adjustment data stored (29).
When more than one data are saved, the adjustment
changes every time the MY BUTTON is pressed.
When no data is saved in memory, the
dialog "No saved data" appears.
When the current adjustment is not
saved to memory, the dialog as shown in
the right appears.
If you want to keep the current adjustment, please press
the ► button to exit. Otherwise loading a data will overwrite the
current adjusted condition.
• ACTIVE IRIS: Changes the active iris mode.
(This item is available only for CP-X2510N or CP-X3010N.)
• PICTURE MODE: Changes the PICTURE MODE (25).
• FILTER RESET: Displays the filter time reset confirmation dialogue (44).
• TEMPLATE: Makes the template pattern selected to the
TEMPLATE item (41) appear or disappear.
• AV MUTE: Turns the picture and audio on/off.
• MY IMAGE: Displays the MY IMAGE menu (54).
• MESSENGER: Turns the messenger text displayed on the screen on/off
( Messenger Function of the User's Manual - Network Guide).
When there is no transferred text data to display, the message
”NO MESSENGER DATA" appears.
MY SOURCE
U sing ▲/▼ buttons selects the picture input port to be selected with
pressing the MY SOURCE/DOC.CAMERA button on the remote
control.
Select the picture input that is connected with a document camera.
COMPUTER IN1 ó COMPUTER IN2
VIDEO ó S-VIDEO ó COMPONENT
(continued on next page)