beautypg.com

Dukane Projector 8920H-RJ User Manual

Page 44

background image

44

OPTION menu

Item

Description

AUTO OFF

Using the ▲/▼ buttons adjusts the time to count down to

automatically turn the projector off.

Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE)

When the time is set to 0, the projector is not turned off automatically.

When the time is set to 1 to 99, and when the passed time with no-

signal or an unsuitable signal reaches at the set time, the projector

lamp will be turned off.

If one of the projector's buttons or the remote control buttons

is pressed or one of the commands (except get commands) is

transmitted to the

CONTROL port during the corresponding time,

projector will not be turned off.

Please refer to the section “Turning off the power”

(15).

LAMP TIME

The lamp time is the usage time of the lamp, counted after the last

resetting. It is shown in the OPTION menu.

Pressing the

RESET button on the remote control or the ► button

of the projector displays a dialog.

To reset the lamp time, select the OK using the ► button.

CANCEL ð OK

• Please reset the lamp time only when you have replaced the lamp,

for a suitable indication about the lamp.

• For the lamp replacement, see the section "Replacing the lamp"

(62, 63).

FILTER TIME

The filter time is the usage time of the air filter, counted after the last

resetting. It is shown in the OPTION menu.

Pressing the

RESET button on the remote control or the ► button

of the projector displays a dialog.

To reset the filter time, select the OK using the ► button.

CANCEL ð OK

• Please reset the filter time only when you have cleaned or replaced

the air filter, for a suitable indication about the air filter.

• For the air filter cleaning, see the section “Cleaning and replacing

the air filter” (64, 65).

(continued on next page)

This manual is related to the following products: