Daewoo DWD-E1211R'S User Manual

Page 8

• Drop items into washer loosely. Items

should move easily through wash water for
best cleaning and wrinkle-free results.

• Load washer properly and select correct

load size setting.
Overloading and selecting a setting too
small for the wash load can :
- Cause poor cleaning
- Increase wrinkling
- Create excessive lint
- Wear out items faster (because of pilling)

• Mix large and small items in each load. Load

evenly to maintain washer balance.
An unbalanced load can make the washer
vibrate during spin.

• Reduce wash time when using a small load

size setting. Load with only a few small
items needs less wash time.

• Use a large load size setting to reduce

wrinkling with permanent press clothes and
some synthetic knits. These items should
have more room to move in the water than
heavy items. (towels, jeans)

Detergent case

Adding fabric softener

• If desired, add measured liquid fabric

softener to the softener inlet.

• Pour liquid fabric softener into the

dispenser using the amount
recommended on the package.

• Do not exceed the maximum fill line.

Overfilling can cause early dispensing of the
fabric softener which could stain clothes.

• Do not open the detergent case when

water is supplied.

• Avoid pouring fabric softener directly on

the clothes.

Adding detergent

• Separate heavily soiled items from lightly soiled ones, even if they would normally be washed

together.

• Separate dark colors from light colors, colorfast items from non-colorfast item.

Sorting

Soil (Heavy, Normal, Light)

Separate clothes according to amount of soil.

Color (White, Lignts, Darks)

Separate white clothes from colored clothes.

Lint (Lint producers, Collectors)

Wash lint producers and lint collectors separately.

Main wash

Pre wash

Fabric softener