Getting started – FiberPlex WDM8 User Manual
Page 8
Getting Started
Initial Inspection
Immediately upon receipt, inspect the shipping container for damage. The container should be retained until the shipment has been checked
for completeness and the equipment has been checked mechanically and electrically. If the shipment is incomplete, if there is mechanical
damage, or if the unit fails to operate notify FiberPlex and make the shipping materials available for the carrier's inspection.
Chassis Mounting
Mount the chassis using fasteners appropriate to your standard 19” rack enclosure. All four (4) mounting points MUST be utilized. Ensure
that there exists adequate clearance for front and rear ventilation. The chassis should be located in an environment where an ambient
temperature between 0° and 50° C can be maintained.