Fenix Watts V27 - Manual (Page 24)

24
- The receiver & the RF antenna must be put at a minimum distance of 50cm of all others electri-
cal or wireless materials like Wi-
Fi router, electrical panel…
- The receiver and the RF antenna can’t be fixed on or inside a metallic part (cabinet…) to avoid
GSM signal attenuation.
- Before wiring the BUS connection, the main power supply of V27 GSM module and V24
Centrale must imperatively be de-energized.
- See the fig4 in part  6.2 for electrical connections
Electrical connections 6.2
All electric connections must be made by an authorized specialist according to the local regulations on
electric installations.
6.2.1 BUS Connection
(Blue)
(Red)
230VAC 50Hz
x A xB L N
V24
V27
Wiring recommendation for “Bus” Connection
- If the wiring distance between the V24 and V27 is more than 10 me-
ters you must use a Shielded cable
(Type “LiYCY” or equivalent, in
this case the distance can be along up to 25M).
- The cable must always be mounted alone in a separate electrical
conduit to avoid electrical perturbation.
Power supply
230VAC 50Hz
Power supply
adaptor
9VDC
B
A