Fenix HT-600 - Manual (Page 8)

Day, Time and PRG. Setting (2).
The thermostat provides the option to program 23 time settings, irrespective of the day, i.e. a total of 161
switching programmes per week. These are shown in the display with a series of figures at the up and bottom
of the display.
You have already set the temperature value before: (see page 2, mode temperature pre-set) .
The comfort function is displayed as a symbol (e.g. 25.5°C).
The energy-saving function is displayed as a symbol (e.g. 20.5°C)
To set the time ,day and program with the below following steps.
- Press and hold the “P” button for around 3 seconds. The minutes flashes in the display (A).
- Change this value using the “+” and “–“ buttons.
- Press the “P” button . The hours flashes in the display (B).
- Change this value using the “+” and “–“ buttons.
- Press the “P” button. The day flashes as a number in the display (C).
- Change this value using the “+” and “–“ buttons. Use 1 for Monday, 2 for Tuesday, 3 for Wednesday, 4
for Thursday, 5 for Friday, 6 for Saturday and 7 for Sunday.
- Press the “P” button . The switch program (D) and mode icon (F) flashes.
- Setup the program using the “+” and “–“ buttons. Use “M” button to change the mode. Comfort
Mode( ) and energy-saving mode ( ).
- Press the “P” button after made the desired setting for this day, it will automatically skip to next day,
you have the option
of skipping to other days by pressing “P” button.
- To leave this menu, just wait 10 seconds or just push on the on/off button. The setup will be
memorized by the EEPROM (when this feature is enabled).
Dimension
Fenix s.r.o. Fenix Trading s.r.o.
Jaroslava Ježka 1338/18a, 790 01 Jeseník Slezská 2, 790 01 Jeseník
tel.: +420 584 495 442, fax: +420 584 495 431 tel.: +420 584 495 304, fax: +420 584 495 303
e-mail: [email protected] , http://www.fenixgroup.cz e-mail: [email protected] , http://www.fenixgroup.cz