Fenix HT-600 - Manual (Page 5)

Terra-Heat HT-600
This programmable Plug-in thermostat is designed to be used for electric heaters and similar appliances.
Keys Features
 Plug in design make it easy to install.
 Five buttons make it easy to operate.
 161 switching programmes per week (23 programmes per day)
 Comfort, Energy-saving Mode Selectable.
 The display shows the set temperature or the measured temperature (measured temperature when
active).
 Temperature display in degrees Celsius.
 Temperature calibration.
 Alarm setting by buzzer.
 Internal or external sensor mode.
 Low and High temperature level settings.
 Enable or disable of the programming mode.
 Build in EEPROM
Technical Data
Output Voltage: 230V
Switching Capacity: 3600W/16A
Backup storage: EEPROM
Sensor Mode: Internal Sensor
Time, Data and Power Failure: Settings are memorized for 6 months
Temperature settings: 0°C ~ 60°C, 0.5°C increments.
Accuracy: +/- 0.5°C (+/- 1°F).
Thermostat dimension: 140mm x 70mm x 39mm, display 37x16mm.
Color: White
IP protection rating: 20.
Certification: CE and encording to EN regulations.
Button Function
Power on/off
Temp up, or setting
Temp down, or setting
Mode Select --Short press
Time, Day and Program Setting
Parameter setting
+ Long press to stop Buzzer Sound Alarm