Denon D-AJ03 - Manual (Page 29)

29
ENGLISH
(1) Timer Registration (continued)
12
Press , adjust the volume and then press .
✽ Be careful not to turn the volume up too high.
ENTER
TUNING/
PRESET
VOLUME 12
The unit will enter the standby mode and then the playback standby mode automatically.
PLAY
TIMER
AM 1 2:00
When the preset time is reached, playback will start.
When the timer end time is reached, the system will enter the power standby mode automatically.
NOTES:
• If the power is turned on while the timer is in the standby mode, the timer will not operate. If you want the timer to
operate, set the power to standby before the timer start time is reached.
• The timer setting will be cleared when the unit is unplugged or the power failure occurs.
(2) Using the same timer setting
• Even when the timer has been cancelled, once the contents of the timer have been set, they are retained. This allows the
same contents to be set again on the next occasion if a change is not needed, Once memorised, the timer setting can be
used as follows.
VOLUME
TIMER/DELETE
PLAY MODE
PROG.
ENTER CLEAR
TUNING/
PRESET
RC-911
1
When the power is on, press .
TIMER/DELETE
✽ “ STANDBY ” is displayed.
If “ STANDBY ” is not displayed, the clock setting has been cleared.
In this case, reset the clock and the timer.
2
Within 10 seconds, press . ENTER
• The timer settings is displayed in order.
The unit will enter the standby mode and then the playback standby mode automatically.
2
ENTER
Button
1
TIMER/DELETE
Button
PLAY
TIMER
AM 1 2:00
During timer playback During operation of the everyday timer