Feelworld FW-1D/S/O - Manual (Page 15)

14
3. Menu function introduction
In the operating status, press button“ ”, then enter into OSD mode.
Press the unit button” ”or “ "to select the options which you need:
(display result) (sound) (system setting) (scan position adjust),
after select the button you need, press“ ”or“ on the unit to confirm, if
need to exit OSD menu, repress button “ ”.
● Display result setting (this setting has 3 pages menu)
Press " "key, pop up OSD menu as below, ” ”or “ "to select
, press " " or " " to confirm, press “ ”or“ ” to select the
adjustment, then use " " or " " to adjust or select the adjustment.
Press" " to exit.
◆ Menu page 1 picture
Contrast : To adjust the brightest and darkest ratio of the image
Brightness: To adjust the image's brightness
Saturation: To adjust the saturation
Tint: Adjustment of the NTSC signal in the composite video mode, the
other mode is invalid
Sharpness: To adjust the depth to the image
Color Temp: Use the adjustment the color temperature can be
pre-set (user, 6500K.7300K, 9300K)