Feelworld FW101AHT - Manual (Page 7)

6
Picture 6： YPbPr input cable
1. Red RCA interface, Pr signal input
2. Blue RCA interface, Pb signal input
3. Green RCA interface, Y signal input
4. Black 3.5mm 4 level interface, connect display YPbPr
signal input interfac 4
2. Operation Instruction
● Panel button operation instruction:
——— Power switch button, after power connecting, video signal
input, the monitor in standby state, press this button, the monitor in working
state, repress the button, monitor recover in standby state.
► ———— No menu display in working state, press directly is volume up.
When menu displaying, this button as menu item selection, after setting
submenu adjust, the button is adjustment for value increase or selection.
◄ ———— No menu display in working state, press directly is volume
down. When menu displaying, this button is menu item selection, after setting
submenu adjust, the button is adjustment for value decrease or selection.
MENU ——— Menu adjust, after do it, press one time this button enter
submenu, repress one again to setting submenu adjust item, then press “►” or
“ ◄ “ button to adjust or select the value, after setting value, press MENU to
confirm.
MODE ——— Input signal switch button. Enter into menu operation is exit
the menu.