Feelworld FW101AHT - Manual (Page 17)

16
2. NO picture after put on the power.
MODE whether in correct position, please press MODE to select correct
signal input mode; Check video signal cable connecting, make sure use
the standard adapter connect the monitor.
3.The image color distortion or abnormal, eg. lack some color.
Please check signal cable connect correctly or not. The cable damage or
loose will cause poor transfer, then above malfunction will happen.
4. The image has a similar interference fringe, smearing and dark.
Check the signal connector is plugged in tight, and the socket
connection is loose and so on.
5. Remote controller doesn't work
Check the battery to make sure the battery is installed properly.
Poor battery or the signal is interfered by some obstructions.
■ Remark:
If there are still other problems, please contact with our related deals.
*If interruptive image occurs, it maybe that the VGA signal frequency isn’t
matched with normal standard.
*It is a normal condition that some bright lines appear on the screen when you
turn off the unit.