Feelworld FW101AHT - Manual (Page 10)

9
Screen adjustment
Press“MENU”enter into OSD Menu, use“◄” or “►” button to select
“Screen adjustment” menu, after selection press“MENU”button to confirm,
then use “◄” or “►” button to select item, after selection, press “MENU”again to
confirm, then use “◄” or “►” button to adjust or select the parameters. After
setting values, presss “MENU” to confirm. Press “MODE”button to exit OSD
menu.
※ Auto Config：When select auto adjustment, the screen will auto adjust
to get the best picture effect. If you are not satisfy with the effect, can be
adjusted by manual as below.
※ H Position：To adjust the OSD position in horizontal,
※ V Position：To adjust the OSD position in vertical.
※ Phase: To adjust phase parameters to get the best picture.
※ Clock：To adjust clock parameters can signal clock signal with the LCD
screen frame, the line signal synchronization to reduce image distortion.
（ OSD）：
Press “MENU”enter into menu, use “◄” or “►” button to select “menu”,
after selection press “MENU” button to confirm, use “◄” or “►” button to select
submenu item, after selection press “MENU” to confirm, then use “◄” or “►”
button to adjust or select parameters. After value setting, press “MENU” to