Feelworld FPV-101A - Manual (Page 6)

5
5. : Volume up or to adjust the value of setting function
6. : OSD item select button or No menu state press it to cycle adjust
the 5 level brightness
7. : OSD item select button or under VGA state press it to auto switch
8. : Image 4:3/16:9 switch
9. ： Image switch up/down(this monitor without this function)
10 . ： Image switch left/right(this monitor without this function)
11. ： To select video signal input switch
1.4
Attached Cable Instruction
Picture 4: SKS cable
1. Connected to the monitor of SKS input jack
2. Black 9-pin plug for VGA signal input
Link to Picture 5-1 of 9 pin socket
3. Black DC jack for DC12v power input
4. Yellow RCA(V1)jack, video signal1 input port
5. Yellow RCA(V2)jack, aerial video signal dedicated input
port
6. White RCA jack, audio signal input