Feelworld FPV-101A - Manual (Page 11)

10
※ Auto Config： When select auto adjustment, the screen will
auto adjust to get the best picture effect. If you are not satis
fy with the effect, can be adjusted by manual as below.
※ H Position：To adjust the OSD position in horizontal,
※ V Position：To adjust the OSD position in vertical.
※ Phase: To adjust phase parameters to get the best picture.
※ Clock：To adjust clock parameters can signal clock signal with the
LCD screen frame, the line signal synchronization to reduce image
distortion. +
（ OSD）：
Press “MENU” enter into menu, use “ ► ” or “ ◀” button to select “OSD”,
after selection press “MENU” button to confirm, use“ ►
” or “ ◀” button to
select submenu item, after selection press “MENU” to confirm, then use “ ►
”
or“ ◀” button to adjust or select parameters. After value setting, press “MENU”
to confirm. Press “MENU” button to exit OSD menu.