Feelworld FPV-101A - Manual (Page 19)

18
5. Trouble shooting
5.1. Only black and white picture.
Please check saturation、brightness & contrast adjustment.
5.2. NO picture after put on the power.
MODE whether in correct position, please press MODE to select
correct signal input mode; Check video signal cable connecting, make
sure use the standard adapter connect the monitor.
5.3.The image color distortion or abnormal, eg. lack some color.
Please check signal cable connect correctly or not. The cable damage
or loose will cause poor transfer, then above malfunction will happen.
5.4. The image has a similar interference fringe, smearing and dark.
Check the signal connector is plugged in tight, and the socket
connection is loose and so on.
5.5. Remote controller doesn't work
Check the battery to make sure the battery is installed properly.
Poor battery or the signal is interfered by some obstructions.
■ Remark:
If there are still other problems, please contact with our related deals.
※ If interruptive image occurs, it maybe that the VGA signal frequency isn’t
matched with normal standard.
※ It is a normal condition that some bright lines appear on the screen when
you turn off the unit.