EXCALIBUR 501 NASCAR Racing Pro - Manual (Page 4)

After you insert two AAA
batteries into the unit, a voice
will welcome you to the
Racing Pro with a “G
ENTLE -
MEN , START YOUR ENGINES
”
message.
NOTE: If you do not hear
the voice, please use a thin,
pointed object to press the
RESET
button that is located
on the back of the unit.
A copyright screen will be
displayed for a short time,
then the splash screen above
will flash. This will be fol-
lowed by the
HOME
menu
screen display. (A
HOME
icon
appears in the upper right
hand corner of the display
when you are on the
HOME
menu screen.) You can return
to this menu at any time by
pressing the
HOME
button.
All the screens are dis-
played five lines at a time,
and up to 15 characters can
be shown on each line. (Go to
the Small Text information in
the Setup section on page 16
to see how you can view 10
characters on a line.) If the
line contains more than 15
characters, you can indicate
the line by moving to it with
your cursor. This will cause
the text to scroll from right to
left and in addition, show all
the text on the line.
The
HOME
menu screen
offers you the choices shown
below:
STOP WATCH
DRIVER BIOS
FACTS AND STATS
TRIVIA GAME
GLOSSARY
PREFERENCES
Scroll through the list using
the s
UP
and t
DOWN
but-
tons. As you scroll, the line
you are on will be highlight-
ed to indicate your position
in the list. A at the right
side of a line means that the
ENTER
button may be
used to view more informa-
tion. After scrolling to the
desired item, simply press
ENTER
button to confirm
your choice.
Stop Watch:
Selecting
STOP WATCH
from the
HOME
menu. It will
display the following screen:
This is the default
STOP
WATCH
. It is suggested that
before the
STOP WATCH
is
first used, that you should
access the
STOP WATCH
setup
by using the “P
REFERENCES
”
menu.
Pressing the
START / STOP
button starts the
STOP WATCH
timing.
Pressing the
LAP / RESET
button will record the lap as
follows:
If the “LAP” function is
on, the first line displays the
lap number and time for that
lap. The second line displays
the accumulated time since
the timer has started. If a
track or track length has been
entered, the third line will
display the speed for the last
timed lap. The fourth line
will then display the lap
number and time of the last
timed lap.
If the “LAP” function is
off, the first line displays the
car number entered from the
P
REFERENCES
menu and time
for that lap. If a track or track
length has been entered, the
third line will display the
speed for the last timed lap.
The fourth line displays the
Using Your Racing Pro
6 7