EXCALIBUR FX-VR206 Fox Sports 7-in-1 Plug & Play User Manual
Page 2
C
ongratulations on your purchase of FOX Sports 7-In-1 Sports Games Plug and Play
from Excalibur Electronics. Golf, Tennis, Baseball and more are just seconds away
with this easy-to-set-up system. The motion-sensing controls make it feel like you are
playing the real thing!
Please read this guide thoroughly, especially noting safety and care instruction. Keep
this guide for reference.
C
ONTENTS
1 - Receiver
1 - Controller
1 - Userʼs Guide
S
ETUP
1. Place the receiver on a fl at, stable surface near
your TV. Please make sure that the receiver and
TV are off before moving on.
2. Connect the RCA cables (red/yellow) to the
corresponding plugs on your TV. Most
television sets have easily accessible RCA
inputs. Note: If your TV does not have
the proper RCA inputs you must purchase a
separate adaptor (not included). You may
have to switch your TV to a specifi c
channel sometimes called “AUX” or “VIDEO”.
3. Turn on your TV, the receiver and controller. If
connected properly you should see the gameʼs
title screen appear.
R
ECEIVER
R
ECEIVER
B
UTTON
L
AYOUT
ON/OFF
Press to turn the unit on and off.
START
Press to confi rm a selection at any menu
screen.
PAUSE
Press to pause the action during a game. Press
again to start the action.
RESET
Press reset to return the unit to the main menu.
B
ATTERY
I
NSTALLATION
R
ECEIVER
1. Turn the receiver over and lay it down on a soft
surface such as a towel or magazine.
2. Remove the battery compartment cover by
using a small, Phillips head screwdriver.
3. Insert 4 - AA batteries, making sure to match the
polarity (+ and -) as shown on the diagram
inside the battery compartment.
4. Replace the battery compartment cover and
screw it back on fi rmly.
C
ONTROLLER
1. Turn the controller over and lay it face-down on
a soft surface such as a towel or magazine.
2. Remove the battery compartment cover by
using a small, Phillips head screwdriver.
3. Insert 2 - AA batteries, making sure to match the
polarity (+ and -) as shown on the diagram
inside the battery compartment.
4. Replace the battery compartment cover and
screw it back on fi rmly.