EXCALIBUR 470-ET Touch Screen Solitaire - Manual (Page 6)

that can be moved either
down to one of the
CARD
STACKS
or up to
SUIT STACKS
.
This particular card can be
moved in the normal way by
lightly pressing the
DECK
STACK
to select the face-up
card and touch either the
SUIT
STACK
or the
CARD STACK .
The card will then relocate to
that spot. The card will auto-
matically be placed in the
proper sequence.
The LCD display will show
the first and last card in a
sequence in card stack. You
can also peek at the cards
between them by using the
REVIEW / KEEP
button, To use
this feature, you must then
select the
CARD STACK
by
lightly pressing it. Also
remember that groups of
cards in proper correspon-
ding sequence within the
STACKS
can be moved as a
group.
You will automatically win
the game, if you can move all
of your cards to the
SUIT
STACKS
. If you are unable to
complete the move to the
SUIT STACKS
, you lose the
game and will need to try
again.
Power Off
If no button is pressed for
about 3 minutes, the unit will
power
OFF
automatically.
You can press the
ON / DRAW -
DEAL
button to turn it on and
continue your last game.
Scoring System
Standard Styles (DEAL 1 or 3)
Each game starts with 0 points.
0 points Move each card from one CARD STACK to another
CARD STACK .
+5 points Move each card from DECK to CARD STACK or
to each face-down card which has been
turned face up.
+10 points Move each card from DECK or CARD STACK
to SUIT STACK .
-15 points Move each card from SUIT STACK and
then back down to the CARD STACK .
-20 points Each pass through the DECK , this will occur after
three passes through the DECK
in S TANDARD D EAL 3.
-100 points Each pass through the deck in S TANDARD D EAL 1.
If a icon with a zero in a square appears below the deck on the
LCD Display, this will mean a pass through the deck is completed.
Excalibur Electronics reserves the right to make technical changes
without notice in the interest of progress.
10 11