EXCALIBUR ET470 Einstein Touch Solitaire - Manual (Page 5)

vertical rows. The fi rst row has only
one card in it. The second stack has
two, the third has three, and so on,
until the seventh stack has seven
cards. Altogether this makes 28
cards in the card stacks. You can see
only the top card on each card stack.
H
OW TO
M
OVE THE
C
ARDS
Once the cards are dealt, youʼll
proceed by moving each of
the cards, whenever possible.
Try to locate the Aces to move to
the suit stack. To move an ace from
the card stack to the suit stack,
press the card stack corresponding
to the card you want to move
and the destination suit stack.
Then take an opportunity to
locate and move each of the
Kings to any empty card stack.
Move cards on the card stacks
together in descending sequence and
alternate suits (mentioned above).
If you would like to move one card or a
whole sequence of cards from one card
stack to another, simply lightly press
one card stack you want to move from
and then lightly press the card stack
you would like to move the cards to.
The unit will only permit you to
move cards when it is legal according
to standard Solitaire rules. Please
remember that the cards must be
placed in the card stacks so that black
and red suits are alternating and that
the cards also go from the highest card
(King) to the lowest card (Deuce).
The lowest card (Ace) should be
moved immediately to the suit stacks
at the top right of the LCD display.
D
RAWING A CARD FROM
D
ECK
When you complete a move, lightly
press the on/draw-deal. You will
then see a new card appear face-up
at the upper left of the LCD Display.
Note: If you have selected either of
the DEAL 3 options, then use the
cards 1,2,3 deal button to be able to
view the two cards below the fi rst
face-up card. You can then move
only the top card. It will assist you in
knowing what cards are located below.
This assists in your game strategy.
Continue the game by pressing the
ON
/
DRAW
-
DEAL
button until you view a card
that can be moved either down to one
of the card stacks or up to suit stacks.
This particular card can be moved in
the normal way by lightly pressing the
deck stack to select the face-up card
and touch either the suit stack or the
card stack. The card will then relocate
to that spot. The card will automatically
be placed in the proper sequence.
The LCD display will show the fi rst and
last card in a sequence in card stack.
You can also peek at the cards between
them by using the
REVIEW
/
KEEP
button,
To use this feature, you must then select
Keep in mind that you can move
a whole sequence of cards or even
part of a sequence to an appropriate
card or to another sequence.
5