Exacq exacqVision Edge/ISD Quick Start Guide - Manual (Page 5)

exacqVision Edge/ISD Quick Start Guide
www.e x acq.com Page 5 of 7
10/17/2014
Motion Detection/Serial Profile Configuration
1. In exacqVision Client, open the Serial Profiles page.
2. Click New to create a new profile.
3. For Profile Name, enter ISD Motion.
4. For SOT Marker, enter motion start.
5. For EOT Marker, enter motion stop.
6. Select the Case Sensitive checkbox.
7. Under Key Word, type start. Make sure the Enable checkbox is selected next to the entry.
8. Click Apply.
1
2
3
4
5
6
7
8