Exacqvision edge/isd quick start guide – Exacq exacqVision Edge/ISD Quick Start Guide User Manual
Page 2
exacqVision Edge/ISD Quick Start Guide
www.e
x
acq.com
Page 2 of 7
10/17/2014
Installation and Configuration
CAUTION: Connecting exacqVision Edge to another exacqVision server will result in unpredictable camera and server behavior. Do
not attempt.
1. Install the ISD camera and insert the SD memory card in the camera.
NOTE: SD cards are normally pre-formatted to the FAT32 file system and automatically mounted when inserted. If you
need to re-format an SD card, it can be done using the Format SD Card button on the General page.
2. Configure the camera’s network parameters to communicate with a PC-based browser using the ISD Finder utility found on
the CD shipped with the camera (ISD Camera Setup.exe), or downloaded from the ISD website.
3. If necessary, upgrade the camera firmware to the latest version from the ISD website.
4. Download the latest exacqVision Client application from the Exacq website at
5. Install the client software on your computer.
6. Download the latest exacqVision Edge server application from
7. Open a browser to the camera and log in. The default username and password are root and admin.
8. On the General page, select Install Edge.
8