Exacq exacqVision Edge/IQeye Quick Start Guide - Manual (Page 4)

www.e x acq.com Page 4 of 5
10/17/2014
10. Select the Security tab and complete the following steps:
a. Select Choose File in the Application File section and locate the .iqa file downloaded previously.
b. Select Upload in the Application File section. It might take up to five minutes for the package to load and install.
c. After successfully installing exacqVision Edge, exacqVision Edge Server is displayed in the Camera Applications list.
11. In the local exacqVision Client, add the remote Edge server on the Add System page using the default exacqVision Server
username (admin) and password (admin256). This allows the local client on your computer to communicate with the Edge
server on the camera. When complete, the server’s status is displayed as Connected.
a
b
c