Exacq exacqVision Transacq - Manual (Page 4)

www.e x acq.com Page 4 of 6
1/13/2015
Configuration
1. Configure the network switch to mirror the necessary traffic to the Transacq server:

The source-destination traffic must pass through the switch.

Setup instructions vary by manufacturer (the following figure shows the configuration of a Netgear GS748TS
switch). Mirroring configuration stops all normal traffic to the destination port. Note that physical switch port
addressing is required.
2. Create a list of IP addresses and port numbers for every text generation device (such as an ATM) and the centralized server
receiving the text. Both the IP address and port numbers must be fixed for proper operation. A distinctive port and/or IP
address is required for every text-generating device.