beautypg.com

ETA Bublimo User Manual

Page 25

background image

You can use the following chart as a help with determining the approximate level of

carbonation of water with CO

2

:

Batch

Watercarbonationlevel

1 press

lightly carbonated water

2 presses

medium carbonated water

3 presses

strongly carbonated water

The 0.45 kg CO

2

carbonator (in relation to the intensity of carbonation) prepares

approximately 85 litres of sparking water.

RECOMMENDATIONS

– Cold water (approx 7 °C) is the most suitable water for carbonation because it better

absorbs carbon dioxide. We recommend storing the water in the refrigerator prior to

carbonation. You can purchase another PET bottle for this purpose.

Donotaddsyrup,iceorcrushedicetoPETbottlebeforecarbonation!Always

addsyrupsinwaterthathasbeencarbonated,otherwisethereisariskof

foamingandoverflowing(Fig.6).

– The more often you press the button PUSH

A1, the more carbonated the water will be.

– Do not press the button PUSH

A1 for a long time and in very short intervals (the water

may leak from the appliance). Wait for about 5 – 10 seconds between individual presses

so that the CO

2

mixes with water well. The button must always be released slowly

– The carbonated water will stay in a well closed bottle for about 2 – 3 days.

– The appliance is equipped with a system of automated drainage of excessive

carbonated water (e.g. in case of overfilling the bottle with CO

2

) using the drainage

outlets

A5. Therefore certain amount of water may appear under the soda maker. This

is perfectly normal and does not constitute a reason to complain about the appliance.

Check the soda maker after each use and wipe off any water.

– The carbonator is empty when no gas is released into the bottle from the nozzle when

the button PUSH

A1 is pressed. In such a case, remove the empty carbonator and

replace it with a new one. Do not dispose of the empty carbonators (i.e. do not throw

them away). The weight of the empty and full carbonator is stated on the carbonator

packaging.

i

MixingSodas (Fig. 13, 14, 15)

To prepare tasty soda or drink, we recommend using Kofola syrups. Add the required

amount of the selected syrup in the bottle with carbonated water. Screw the cap and turn

the bottle upside down once to mix the drink. You can either consume the drink right away

or store it in the refrigerator.

ATTENTION

– Always add syrups, ice or crushed in water that has been carbonated; otherwise there

is a risk of foaming and overflowing.

– Do not shake the bottle! It releases the carbon dioxide from the water.

– Follow the recommended instructions of the producer when batching the syrup; use it

according to your taste.

– Do not use syrups after the use by date (expiration date). Store syrups in a cool and

dark place (see the instructions of the producer on the syrup packaging).

!

GB

25 / 45