Iii. preparation of the appliance – ETA Bublimo User Manual

Page 23

–

The carbonator is only designed for CO

filling (food gas).

–

The carbonator may only be refilled by an authorized organization.

SAFETYADVICEFORTHEPETBOTTLE

–

Do not use a bottle that is deformed, cracked or scratched or that has changed colour or

lost transparency or tightness. Observe the durability of the bottle; the date is printed on

the side of the bottle. Do not use the bottle after the use by date! Dispose of the bottle

ecologically and replace it with a new one.

–

Regularly check that the sealing in the cap of the bottle is not worn out or damaged.

–

Prevent contact of the bottle and the cap with aggressive cleaning agents (e.g. alcohol,

diluentsorammoniac) as they may cause damage (e.g. deformation).

–

Do not wash the bottle or the cap in the dishwasher (unlesssuchacleaningmethodis

permittedbyasymbolonthebottle).

–

Do not expose the bottle to temperatures below 1

C and above 40

C and protect it from

sources of heat (e.g.

stove,electric/gascooker,hotplate,grilletc.) or direct sunlight.

–

Never place the bottle in the freezer as it may cause damage (e.g. cracking) to the bottle

and do not store the bottle in a car.

–

The bottle is not designed for heating liquids in a microwave oven.

–

Do not open the bottle by force and do not adjust the surface of the bottle in any way

(e.g.

usingself-adhesivefoil,stickers,paperorheatinsulation).

–

If the bottle is exposed to some vibrations (e.g. during transportation), unscrew the cap

slowly. It eliminates excessive gas and prevents spraying of the drink when opening the

bottle.

– Never point the PET bottle neck at a face or other parts of your or other person’s body.

–

The bottle is only designed for cold or warm filling (max.40°C) of pure drinking water

and syrup. The water level must be within the Min and Max marks.

–

Rinse (atleastfivetimes) the bottle and the cap well prior to the first use, e.g. in hot

water with soap or disinfectant, subsequently rinse with clean water and air dry.

–

Always prepare fresh water or store water in the refrigerator.

–

The water must not exceed the maximum filling level of0.9litres when filling the bottle.

–

Always carbonate the water with carbon dioxide first and then add a syrup, ice or

crushed ice of your choice. Otherwise, the bottle may overflow.

II. DESCRIPTION OF THE APPLIANCE AND ACCESSORIES (Fig. 1)

A–SodaMaker

A1 – Button for CO

batch

A5 – Drainage outlets

A2 - PET bottle inclination control

A6 – Cover arresting button

A3 – Nozzle

A7 – PET bottle holder

A4 – Closure

A8 – Carbonator holder

A9 – Spare gasket

B–PETBottle

B1 – Cap
C–CO

PressureBottle (carbonator) for type ETA263890000, ETA263890010,

ETA263890020 and ETA263890030 not included (it is possible to buy)

III. PREPARATION OF THE APPLIANCE

Remove all packaging and take the appliance and all accessories out. Remove all

adhesive foils, stickers or paper from the appliance and its accessories.

23 / 45