ETA Anna - Manual (Page 19)

The required water temperature choosing and the kettle switch-on you can do by
pressing one of five temperature buttons. Please consider the following tips as examples
and inspiration, the purpose of which is not to provide instructions, but to show various
possibilities of preparing substances. Water temperatures are only approximate and may
vary according to personal taste, quantity, type, quality and age of the used tea, coffee,
etc.
– 40 °C = children’s food preparation,
– 70 °C = green tea,
– 80 °C = white tea,
– 90 °C = oolong teas, coffee, instant drinks, soups,
– 100 °C = black and herbal teas and other teas.
ATTENTION
– You can change the selected water temperature during heating by pressing
another button for setting temperature.
– If you are making food for children (e.g. with the 40 °C button), it is necessary to boil the
water at 100 °C first.
!
IV. MAINTENANCE
Unplug the appliance from power supply by taking the fork of the power cord
out of the socket! Clean the kettle only when it is cooled down! Do not use rough
and aggressive detergents (e.g. sharp objects, scrapers, diluting agents or other
solvents)! The casing of the electric kettle and the heating bottom is made of top-quality
stainless steel, but in common use, impurities from water get stuck on them (water scale),
particularly above the heating element. It is not rust or another material defect of the
kettle container.
Cleaning the kettle
Pour about 50 g citric acid to the kettle with the water scale sediment. Fill the kettle to
about one half and mix. After it dissolves, fill the kettle to 3/4 of the maximum amount of
water. Place the electric kettle on the stand and turn it on. Before boiling, turn off the kettle,
let the solution take effect for about 10 minutes and then pour it out. Clean the kettle
thoroughly with clean water. Repeat the whole procedure if the kettle is too soiled. Clean
the electric kettle regularly!
Cleaning the sieve (A5)
Take the sieve from the kettle. Clean it from possible sediments in running water using
a fine brush. Then put the sieve back in the opposite way.
V. ENVIRONMENT
Printed signs of materials used for manufacture, packing, components and accessories,
as well as their recycling, are on all the pieces if their dimensions enable it. The symbols
on the product or in the accompanying documentation mean that the used electric
or electronic products must not be disposed together with municipal wastes. Please,
hand them over to the collection points designed for their correct disposal, where they
will be accepted free of charge. By correct disposal of this product you can help to
preserve valuable natural resources and help to prevent possible negative impacts to the
environment and to human health, which could be the results of incorrect waste disposal.
19
GB
/ 34