Dual XDVD8265 - Manual (Page 11)

11
General Operation
XDVD8265 OPERATION
Power On/Off
Eject
Monitor Angle Position
Mute
Mode
Volume
Press to turn the unit on/off. Due to its use of advanced microprocessors,
if the unit is on, then turned off, it can not be turned on again for 18 seconds
(microprocessor sleep/boot time).
Press to allow the front panel to slide down and access the disc slot.
Press ANGLE momentarily to select between 4 different monitor view angles.
Press ANGLE for more than 1 second to return the monitor to the fully open
or fully closed positions.
Notes:
• The color of the LCD monitor varies between viewing angles. Select the
angle with the most optimum view for your location.
• The last position of the monitor is saved in memory. The monitor will
return to its last position automatically the next time it is opened.
Press MUTE to silence the audio; will appear in the OSD (On Screen
Display). Press MUTE again to cancel.
From the front panel or remote control:
Press MODE to select between tuner, DVD player, Navi (optional), AV1 and
AV2 inputs. Modes of operation are indicated in the OSD.
Using the touch screen:
Gently press the upper right corner of the screen to display the OSD menu
bar and press RADIO, DVD, AV1 or AV2 in the OSD menu bar to select the
desired source. The OSD menu bar appears all the time in radio mode.
Notes:
• The vehicle must be in park and the parking brake applied to view video on
the in-dash monitor.
• As a safety feature, “WARNING! PICTURE OFF FOR YOUR SAFETY” will
show on the display when the vehicle's parking brake is not engaged.
DVD, AV1 and AV2 audio can be heard while the vehicle is in motion.
• The video display of the in-dash unit will not operate while the vehicle is
moving. This is a safety feature to prevent driver distraction. In-dash video
functions will only operate when vehicle is in Park and the parking brake
is engaged. It is illegal in most states for the driver to view video while the
vehicle is in motion. Refer to local laws in your area.
From the front panel or remote control:
Press VOL to increase the volume level (00-46).
Press VOL to decrease the volume level.
Using the touch screen:
Press the screen to display the OSD menu bar and press
to display the
volume level bar. Press  or  to adjust the volume.