ETA Fresco - Manual (Page 19)

Whipping beaters (E)
Use: to beat or whip egg whites, cream sauces, cream, pastry, puree, etc. Never use the
whipping beaters for mixing tough substances such as yeast dough.
Attaching the accessories: Attach the beaters in the corresponding holes A4 at the
bottom of the motor unit as far as the stop. Disengage the
beaters by pushing the ejector button A3.
Kneading hooks (F)
Use: to process spreads, mash potatoes, to knead dough, etc.
Attaching the accessories: the mutual position of the tools follows from their design
and this is why the tools are not interchangeable. Attach
the hooks in the corresponding holes A4 at the bottom of
the motor unit as far as the stop. Disengage the beaters by
pushing the ejector button A3.
Caution
After 10 minutes of uninterrupted work, leave the motor unit to cool down for a few minutes.
Also a single beater or kneader can be used to process food. The tools can be disengaged
only with the speed setting switch A1 in position 0.
Dip blender (G) – applicable for ETA 1047, ETA 2047
Use: to mix or blend any type of fluid, mayonnaise, diet and baby food, etc. in a suitable
dish or bowl.
Attaching the accessory: lift cover A5 and screw the blender in the hole in motor unit
A. To disengage the blender, follow the above procedure in the
reverse order.
Stand with rotary bowl (B, D) – applicable for ETA 2047
Use: for whipping or blending without the need for holding the motor unit in your hand.
Attaching the accessory: place the stand B on a flat work surface (see please I. SAFETY
WARNING). Attach the desired tools E or F in the motor unit
A. Attach the dip blender on arm B1 so that the teeth on the
accessory engage against the teeth on the lifting arm and press
the blender until it slides in the recess in the arm (a click is
heard). Slide the lid C on the arm. Lift arm B1 and place bowl
D with the food to be processed in the stand and lower the arm
until it locks in position.
Removing the motor unit (A) – the motor unit A can be unlocked by pushing button B3
and removed off the lifting arm B1.
Storing the appliance and accessories
After finishing work, switch the mixer OFF and unplug the power cord plug A6 off the
mains. Place the mixer A and its accessories E, F, G in holder H (Fig. 3).
Store the appliance after cleaning at a dry, dustfree and safe place, out of reach of children
and incapacitated people.
V. MAINTENANCE
Unplug the appliance from power supply by taking the fork of the power cord out of
the socket! Do not use rough and aggressive detergents (e.g. sharp objects,
19
GB