ETA Fresco User Manual

Page 18

B – stand

D – rotary bowl

B1 – lifting arm

E – beaters

B2 – arm lock button

F – kneading hooks

B3 – blender lock button

G – dip blender

C – lid

H – holder

C1 – filler hole cap

I – spatula

III. PREPARATION FOR USE (Figs. 1, 2)

Remove all packing items and unpack the mixer and its accessories. Remove all

possible adhesion foils, stick-on labels or paper from the appliance. Before using the

appliance for the first time, wash all parts coming in contact with the food in hot water with

a suitable detergent, rinse them thoroughly in clean water and wipe them or leave them to

dry.

Using the speed settings (A1, A2)

0 – switch off

1 to 4 – speed settings (to be used for whipping, mixing and kneading)

– blending speed setting (the dip blender is activated by depressing the MAX

button)

the

MAX button – the motor is running at its highest power and it keeps running while the

A2 button is pushed.

– the button can be used at any speed setting except

Stand (B) – applicable for ETA 2047

Lifting the arm – push the B2 button and lift the arm B1. To lower the arm, push the B2

button another time. The arm will move downwards and lock (a click will

be heard).

Rotary bowl (D) – applicable for ETA 2047

Place the rotary bowl in the stand

B. To remove the bowl, follow the above procedure in

the reverse order.
Applying and removing the lid (C) – applicable for ETA 2047

Place the lid on the lifting arm

B1 by sliding the lugs on the lid in the counter grooves on

the arm. Push the lid as far as it goes. To remove the lid, follow the above procedure in the

reverse order.
The filler cover (C1) – applicable for ETA 2047

By pushing the filler cover aside, the filler hole can be used to add fluids or solid food in the

bowl

D while the motor unit A is running.

Holder (H) – applicable for ETA 1047, ETA 2047

The holder is deigned to hold the mixer and tools. Fit the holder on the wall using the

supplied dowels and screws.

Make sure that there is no electric, telephone, plumbing fitting under the plaster at the

place of mounting the holder.

IV. USING ACCESSORIES (Figs. 1 and 2)

Take please the following tips for examples and inspiration. Rather than giving instructions,

the aim is to show different ways how to process food. The processing times are never

longer than a few minutes. It is advisable to break work from time to time, switch the

appliance

OFF (the 0 setting) and clean any sticking food off the tolls or the bowl or lid

(see please

I. SAFETY WARNING).