ETA Sting - Manual (Page 20)

For trouble-free operation of the vacuum cleaner, please use tested
micro-filters recommended by the producer.
II. EQUIPMENT AND ACCESSORIES (fig. 1)
A – cleaner
A1 – suction chamber lid A5 – exhaust cover
A2 – inlet hole A6 – cord
A3 – START/STOP button with A7 – dust bag
electronic power regulation A8 – pre-motor microfilter
A4 – handle A9 – exhaust microfilter
A10 – electric socket
B – accessories
B1 – floor nozzle B3 – crevice nozzle
B2 – upholstery nozzle B4 – suction tube
With the vacuum cleaner type 2430/13 you can buy electric rotation nozzle
ETA 297590000 as special accessory, narrow floor nozzle ETA 147700260
ACCESSORIES
floor nozzle (Fig. 5) - is designed for vacuuming carpets (with low or high pile) or smooth
floors.
Upholstery nozzle (Fig. 6) - is designed for vacuuming (e.g. upholstered furniture, clothes,
car interior),
crevice nozzle (Fig. 7) - is designed for vacuuming places that are hard to access
(e.g. between upholstery cushions, in grooves for glasses in
furniture, in libraries, radiators, central heating elements),
suction tube - is designed for vacuuming places that are hard to access (e.g. under/behind
furniture, in corners of rooms/ceiling).
III. PREPARATION AND USE OF VACUUM CLEANER
Remove all packing material, take out the vacuum cleaner and the accessories. Assemble
the vacuum cleaner by holding the adapter with your hand and by turning it to the left
by 90 ° and insert the vacuum cleaner on the bayonet (Fig. 2). Turn the adapter by 90°
back to the right until the adapter snaps into the cavity in the vacuum cleaner. The
vacuum cleaner can be disassembled in the opposite way (Fig. 3). Slide the selected
accessories to the intake duct of the vacuum cleaner (Fig. 4). Plug the power cord to
a socket. Plug the power cord to a socket. Switch the vacuum cleaner on and off by
turning the knob on from “ O” position to “min” position (Fig. 8). You can regulate the
suction performance of the vacuum cleaner by turning the knob towards the position
to “ max”. The minimum suction power is recommended for fine fabrics (e.g. curtains,
drapes). The maximum suction power is recommended for floor coverings (e.g. heavy-
duty carpets). After finishing work, switch off the vacuum cleaner and unplug it from power
supply. Wind the power cord to the hook and cavity on the bottom part of the vacuum
cleaner (Fig. 17). Type is equipped with a bow shaped handle that makes manipulation
and carrying the vacuum cleaner easier.
GB
20 / 36