beautypg.com

Ii. equipment and accessories (fig. 1), Iii. vacuum cleaner preparation – ETA Elance User Manual

Page 22

background image

– Never leave the vacuum cleaner exposed to weather conditions (e.g.

rain, frost, direct sun

radiation, etc.).

– Never use (switch on) the vacuum cleaner if it is placed in the holder and it is being charged!

– If you need to use an extension cord, it has to be uncorrupted and it has to comply with the

valid standards.

– In order to ensure safety and proper function of the appliance, use only original spare parts

and accessories that are approved by the manufacturer.

– Never use the appliance for any other purpose than for the intended one described in these

instructions for use!

– The manufacturer is not responsible for damage caused by improper use of the appliance

and the accessories and its warranty for the appliance does not apply in situations when

the safety warnings above are not complied with. Failure to replace or maintain all filters

regularly according to the instructions in Chapter

IV., V. and also using non-original

filters, the properties of which resulted in failure or damage of the vacuum cleaner, is also

understood to be improper use of the appliance.

II.

EQUIPMENT AND ACCESSORIES (Fig. 1)

A – vacuum cleaner

A1 – ON/OFF switch

A4 – handle

A2 – dust bin arrest

A5 – dust bin

A3 – hand cleaner arrest button

B – rod vacuum cleaner body

b1

ON/OFF switch

B3 – vacuum cleaner cover

B2 – handle

B4 – floor nozzle arrest button

C – charging stand

C1 – accessory storage space

C3 – cleaner charging contacts

C2 – adaptor connector

D – floor nozzle with a rotation brush

D1 – indicator light

E – accessory

E1 – short slit nozzle

E3 – microfilter

E2 – long slit nozzle

E4 – filter protector

F – power adaptor

III. VACUUM CLEANER PREPARATION

Remove all packing material, take out the vacuum cleaner and the accessories.

Fixing vacuum cleaner into adapter

Put vacuum cleaner

A to cover B3 with the suction vent and then tilt the vacuum cleaner to

the aperture to the maximum position (you will hear a snapping sound, Fig. 2A). After taking

the vacuum cleaner from the adapter you have to push lock button

A3 and then to pull the

vacuum cleaner out (Fig. 4).

For trouble-free operation of the vacuum cleaner, please use

tested micro-filters recommended by the producer.

22

GB

/ 42