ETA Andare Animal User Manual

Page 24

Cleaning theTURBO nozzle

If hair or threads are twisted around the mounting of the drive shaft and if they cannot be

removed in the way described above, the impurities have to be removed by dismantling the

nozzles. In the lower part remove the cover. Now you can clean the nozzle using

a suitable tool (eg tweezers). Insert the lid to the nozzle in the opposite direction (you will

hear a snapping sound).

VI. TROUBLESHOOTING

Problem

Cause

Solution

Motor won‘t start Power supply not connected

Check the cord, plug and the socket

button is not switched on

Push button

The container

cannot be put

into the vacuum

cleaner -

activated safety

lock

The parts of the filtration

system not inserted properly in

the container

Check/adapt the position of the

separator/foam micro-filter and the

HEPA filter in the container

Suction output is

not sufficient

Regulation in MIN position

Set regulation to MAX.

Open suction

Close the hole in the hose handle

Dust container full

mpty the container

Clogged micro-filters

Clean or replace the micro-filters

Nozzle, suction hose or tube is

clogged

Remove blocking objects

The cable

cannot be

wound in the

entire length

Twisted cable

Straighten the cable

Take out about 50 cm of the cable

and push again button

VII. ENVIRONMENTAL PROTECTION

If the dimensions allow, there are labels of materials used for production of packing,

components and accessories as well as their recycling on all parts. The symbols specified

on the product or in the accompanying documentation mean that the used electrical

or electronic products must not be disposed of together with municipal waste. For proper

disposal of the product, hand it over at special collection places where it will be taken

over free of charge. Suitable disposal of the product can help to maintain valuable natural

resources and to prevent possible negative impacts on the environment and human health,

which could be the possible consequences of improper waste disposal. Ask for more

details at the local authorities or at a nearest collection site. Fines can be imposed for

improper disposal of this type of waste in agreement with the national regulations. If the

appliance is to be put out of operation, we recommend its cutoff after disconnecting it from

power supply and in this way it will not be possible to use the appliance again.

24 / 39