Epiphan VGA Splitter - Manual (Page 5)

1. Installation and Getting Started Connecting and Powering on the VGA Splitter
User Guide Page 5
Connecting and Powering on the VGA
Splitter
This section describes how to connect a VGA Splitter to a VGA
source and to a VGA monitor and VGA Frame Grabber ( Figure 1 ).
The Frame Grabber is connected to the fault tolerant VGA OUT
port because the primary application is image capture using the
Frame Grabber.
Figure 1: Connecting a VGA Splitter device
To connect the VGA Splitter
1 Use a VGA cable to connect the VGA source to the VGA
Splitter VGA IN port.
2 Use another VGA cable to connect the VGA Frame Grabber
(for example, a VGA2USB device) to the VGA Splitter VGA
OUT (fault tolerant) port.
3 Connect a VGA display device (for example a VGA monitor)
to the VGA Splitter VGA OUT port.
Connect to
VGA IN
Connect to
VGA OUT
VGA Splitter
Connect to
VGA OUT
(fault tolerant)
VGA Source
VGA Monitor
VGA Frame Grabber