Epiphan VGA Splitter - Manual (Page 3)

1. Installation and Getting Started
User Guide Page 3
1. Installation and Getting Started
This document describes how to use the Epiphan VGA Splitter
device to split a single VGA signal between two VGA display,
capture, or recording devices. The Epiphan VGA Splitter is an
active splitter that takes a single VGA input and provides two
VGA outputs:
• A fault tolerant VGA output
• An amplified VGA output
The fault tolerant VGA output provides a direct connection to the
original VGA output and is delivered by the Epiphan VGA
Splitter without any changes to the VGA signal. If the Epiphan
VGA Splitter loses power, the fault tolerant VGA signal will be
maintained. The quality of the amplified VGA output is also the
same as the original VGA signal. It is a copy of the original VGA
signal that is then amplified by the Epiphan VGA Splitter. The
amplified signal is lost if power is disconnected from the VGA
Splitter device.
This document contains the following sections:
•
Hardware Features
• Connecting and Powering on the VGA Splitter
• Troubleshooting