EM Acoustics MSE-218SP self-powered subwoofer User Manual
Page 5
Page 5 of 20
MSE-218SP User Manual
v1.1 February 2013
VENTILATION AND HEAT SINK
The heatsink and cooling fans are provided to ensure reliable operation of the
loudspeaker, and to protect it from overheating. The heatsink and fans must not be
blocked or covered. This product should only be installed with adequate ventilation
around the rear of the unit.
WATER AND MOISTURE
Do not use this product anywhere near water, or place any liquid-containing-vessels near
to the unit where spillage could occur.
CLEANING
Clean the loudspeaker only with a dry cloth. Disconnect the loudspeaker from the mains
before cleaning. Do not use liquid or aerosol cleaners.
POWER CABLE PROTECTION
Power supply cables should be routed so that they are not likely to be walked upon,
pinched or damaged by items placed upon or against them. Pay particular attention to
cables and plugs where they connect to the mains supply and to the loudspeaker itself.
LIGHTNING
For added protection of the product during lightning storms, or when it is left unattended
and unused for long periods of time, disconnect it from the mains supply. This will
prevent damage due to lightning and power line surges. Disconnection from the mains
power supply can only be achieved by removing the plug from the mains socket and by
external disconnection of all poles from the mains.
INTERFERENCE OF EXTERNAL OBJECTS AND/OR LIQUIDS
Never push any object of any kind into this product through its openings as they may
touch dangerous voltage points or short out parts that could result in a fire or electric
shock. Never spill liquid of any kind on the loudspeaker.
ACCESSORIES
Only use accessories supplied by EM Acoustics specifically for use with this product.
Unsuitable accessories for mounting or flying this loudspeaker could fail, causing serious
physical injury and/or damage to the loudspeaker.
CONNECTIONS
When connecting this product, perform all connections before connecting the unit to the
mains power. Failure to do so may cause electric shock and serious personal injury and/or
damage to the loudspeaker.
MAINS POWER PRECAUTIONS
When mounting or connecting this product, always disconnect it from the mains supply.
Only connect the product to an appropriate AC circuit and outlet, according to the
requirements stated on the panel on the rear of the loudspeaker.
If a power cut occurs when the unit is switched on, it will restart automatically once the
power supply is restored. All settings prior to the loss of power will be maintained.