EM Acoustics MSE-218SP self-powered subwoofer - Manual (Page 16)

Page 16 of 20
MSE-218SP User Manual
v1.1 February 2013
Appendix A – Technical Specifications
MSE-218 self-powered subwoofer
ACOUSTICAL
ENCLOSURE TYPE: dual drive unit bass reflex, self-powered
FREQUENCY RESPONSE 1 : 65Hz – 20KHz +/- 3dB
DISPERSION 2 : omnidirectional (unless in Cardioid mode)
DRIVE UNITS: 2 x 18” (457mm) neodymium LF cone drive unit
MAXIMUM SPL 3 : 137dB continuous, 143dB peak
MECHANICAL
DIMENSIONS (HxWxD): 550 (21.7) x 1300 (51.2) x 850 (33.5) mm/(ins)
NET/SHIPPING WEIGHT: 118 (259.6) / 122 (268.4) kg/(lbs)
ENCLOSURE: 18mm (3/4”) multi-laminate Birch plywood – rebated, screwed &
glued.
Finished in black semi-matt textured paint
RIGGING/SUSPENSION: 2 x M20 threaded flange adapters
8 x tour-grade bar handles
4 x tour-grade castors
GRILLE: Fabric-backed hex punched steel
AMPLIFIER PACKAGE
AMPLIFIER TYPE: Dual monobloc Class-D
AMPLIFIER POWER: 2 x 2400W RMS @ 4 ohm load
DSP SYSTEM: 96kHz sample rate, 120dB dynamic range
COOLING: 2 x low-speed 5VDC fan on heatsink – temperature controlled, only
required under extreme conditions
CONNECTORS: Female XLR input, male XLR link output (selectable as analog or
AES/EBU input)
Neutrik PowerCon TM input with loop output
Neutrik Ethercon TM RJ45 socket