EM Acoustics MSE-218SP self-powered subwoofer - Manual (Page 11)

Page 11 of 20
MSE-218SP User Manual
v1.1 February 2013
4.0 – Amplification and Audio
The MSE-218SP includes a highly advanced 64-bit DSP processing card to handle high &
low pass pass filters, gain and delay settings, which are accessed by means of preset
programs that are factory installed into the unit. This DSP card feeds a pair of Class-D
amplifier modules (one module per drive unit) providing ample power to drive your
loudspeakers to their full potential. The amplifier and DSP combination also provides full
limiting and remote monitoring.
4.1 - Audio Inputs
The loudspeakers are supplied with female XLR input connectors, and male XLR link
output connectors. Both of these connectors are wired pin 1 screen, pin 2 positive, pin 3
negative. The MSE-218SP loudspeakers can accept both analog and digital AES/EBU
inputs. The factory default setting is analog – see later in this manual for details on
selecting digital input.