Elfa Artic sloped - Manual (Page 4)

www.elfa.com
Page 4 of 4
10
9
11
Customer service / Kundendienst
Deutschland
Tel. 05242 3789375 Fax. 05242 9683632.
E-post:[email protected]
Service client
France
Tel. 472 330 731 Fax. 472 345 260
E-post:[email protected]
Serwis
Polska
Tel. 42 611 64 01 Fax. 42 611 64 02
E-post:[email protected]
Finally: Assemble the other doors
Fit the other doors in the tracks as instructed in ”Assembly guide for
Ample, Artic, Grace, Centric”.
Adjust the sloped door in the top track
Turn the guide bracket arm to adjust the depth of the door (see fig. on left).
Loosen the two screws, using a hex wrench. Place the door back in the
tracks and turn the guide bracket arm to a position so that the door runs
smoothly in the top track. Tighten both screws.
Shelf
Less dist
ance
Back of sliding door
Shelf
Guide rail
Greater dist
ance
Guide rail
Back of sliding door
Mirrors
Use a window cleaner to remove stains from the mirror. If this does not
work, use a razor blade or steel wool.
(N.B. Only steel wool not Scotch-Brite™ or similar.) Razor blades and
steel wool will not scratch the mirror!
Any spots or glue residue left on the mirror from production, despite our
quality control, can be removed as described above.
Veneered panels
There may be some dust on the back of the veneered panels. Vacuum
clean the back surface and wipe with a damp cloth.
Cleaning instructions
Sloped sliding doors
ASSEMBLY GUIDE