Maintenance, Cleaning and washing, Engine oil cooler – Dixon ZTR34/968999619 User Manual
Page 47
English
-
47
MAINTENANCE
Cleaning and Washing
Regular cleaning and washing, especially under the
mower deck, will increase the machine’s lifespan.
Make it a habit to clean the machine directly after use
(after it is cooled), before the dirt sticks.
Do not spray water on the top of the mower deck. Use
compressed air to clean the top side of mower deck.
Regulary clean deck and underside of deck, avoid
spraying engine and electrical components with water.
Engine oil cooler
Kohler engine only.
1.
Clean the outside of fins with a brush.
2.
Remove the two screws holding the cooler unit to
the blower housing.
3.
Tilt the cooler downward.
4.
Clean the inside of the cooler with a brush or with
compressed air.
5.
Reinstall the oil cooler to the blower housing.
Engine oil cooler
8011-472
Caster Wheels
Check every 200 hours. Lift front of unit off of ground
so caster wheels can rotate freely. Tighten caster bolt
then back off
1
/
2
turn. Check that wheel rotates freely. If
wheel does not rotate freely back the caster bolt off in
1
/
4
turn increments until wheel rotates freely.
Foam filled tires or solid tires will void the warranty.
Hardware
Check daily. Inspect the entire machine for loose or
missing hardware.
Cleaning
8050-092
Use protective glasses when
cleaning and washing.
Caster wheels