Dynex DX-WD1202 - Manual (Page 7)

7 DX-WD1202
Need help? Call 800-305-2204
Tightening hidden cams
In the remaining steps, use these illustrations for instructions on tightening hidden cams.
Warning: Risk of damage or injury. Hidden cams must be completely tightened. Hidden cams that are not
completely tightened will loosen, and parts may separate.
A hidden cam (Q) has an arrow. When you insert the hidden cam, make sure that the arrow points toward the
hole in the side of the part you are inserting it into.
You’ll need:
Arrow
Make sure that you turn the
hidden cam 210°. Note the
position of the arrow on the
hidden cam.
Arrow
In the illustration below,
the hidden cam has not
been tightened enough.
210°
Flatblade screwdriver