Step 10, You’ll need – Dynex DX-WD1202 User Manual
Page 16
16
DX-WD1202
Need help? Call 800-305-2204
Step 10:
With the top of the unit facing down, fasten the foot base (U) to the extension block (K). Use a Phillips
screwdriver and four black 9/16" pan head screws (GG). Then, push the foot (T) into the foot base (U).
Note: Turn the foot (T) for adjustments. The foot should not extend beyond the bottom edge of the base (N).
You’ll need:
Phillips screwdriver
GG (4)