Echo Bear Cat DL10 - Manual (Page 9)

Debris Loaders 5
Section
ASSEMBLY
2
2.1 ATTACH VACUUM HOSE
1
2
3
4
5
6
7
8
9
10
1. Slide t-bolt clamp (2) over intake hose (3).
2. Insert hose inlet weldment (1) into inlet hose (3) and then tighten
t-bolt clamp (2) over inlet hose and inlet weldment.
3. Fasten the hose inlet adapter on the inlet hose (3) to the fan
intake weldment with the two provided knobs (9) and 5/16 x 3/4"
carriage bolts (10).
4. Assemble the two hose supports using the 1/2 x 2-3/4"bolt (?),
spacer (7) and 1/2" nut provided in the owner's kit.
5. Insert the hose support (8) into the fan housing spacer.
6. Connect the hose (3)to the hose support by hooking the chain
links (5) into the hose support hooks (6).