Echo Bear Cat SC2170 - Manual (Page 8)

2 INCH CHIPPER/SHREDDER
4
SAFETY
The numbers below correspond to the decals in Section 1.6. Familiarize yourself with all of the safety and operational
decals on the machine and the associated hazards. See the engine owner’s manual or contact the engine manufacturer
for engine safety instructions and decals. Make certain that all safety and operating decals on this machine are kept
clean and in good condition. Decals that need replacement must be applied to their original locations.
1
5
2
3
4
BOLT, 5/16 x 3”
CE COMPLIANT
WASHER, 5/16
NUT, 5/16 NYLOCK
1.8 INSTALLATION OF CHIPPER CHUTE BOLTS FOR CE COMPLIANT OPERATION
1.7 SAFETY DECAL LOCATIONS
CE COMPLIANT OPERATION OF THIS MACHINE WILL
REQUIRE THE INSTALLATION OF THE TWO 5/16 X 3”
BOLTS WITH 5/16 WASHERS AND NYLOCK NUTS. CE
COMPLIANT AREA MACHINES WILL HAVE THE DECAL
SEEN BELOW.