Echo Bear Cat SC2170 - Manual (Page 10)

2 INCH CHIPPER/SHREDDER
6
Section
FEATURES & CONTROLS
Understanding how your machine works will help you achieve the best results when using your chipper/shredder. The
following descriptions define the features and controls of your machine.
3
6. SHREDDER CHUTE
Feed sticks and branches no larger than ¾ inch in diameter
into the shredder chute.
1. CHIPPER CHUTE
Feed branches no larger than 2 inches in diameter into the
chipper chute.
5. RECOIL STARTER
Used to start engine. Grasp handle and pull out to start.
Refer to engine manual for further engine operating
instructions.
7. TRANSPORT HANDLE
Used to move machine. Grasp handle, tip machine back
onto its wheels and push or pull machine to desired location.
Never transport or move machine with engine running.
1
2
3
4
5
6
7
2. DISCHARGE CHUTE
Chipped and shredded materials are discharged onto the
ground through the discharge chute.
4. OIL DIPSTICK
Check the oil level before each use by removing the dipstick.
3. GAS TANK CAP
Check the gas level before each use.